Datasheet

DATA SHEET
2170203
UNITRONIC
®
BUS LD … x 2 x 0,22 mm²
gültig ab :
27.10.2009
elaborated by:
Petra Samek, PDC
Dokument: DB2170203EN04 page 1 of 1
Nr.: 0019/0408
Application
UNITRONIC
®
BUS LD is a screened, twisted paired cable for bus systems with a data transmission rate up to 10
MBit/s. The twisting of the conductors into pairs ensures maximum interference suppression of the individual
signals. The copper screening protects against external electromagnetic influences.
Cables of this composition are intended for limited flexible use and for permanent installation in dry and damp
interiors.
Applicable connectors: D-Sub-Connector, 9-pins; Round-Connector, 9-pins (system of protection IP 65)
Design
Conductor multiple wire stranding of bare copper wires
Insulation special PE-based compound
Core identification acc. to DIN 47100
Stranding Cores twisted into pair, pairs twisted together
Wrapping plastic foil
Screening braiding of tinned copper wires
Sheath special PVC-based compound
Sheath colour violet similar to RAL 4001
CableØ 1 pair approx. 5,7 mm (part no. 2170203)
CableØ 2 pairs approx. 7,1 mm (part no. 2170204)
CableØ 3 pairs approx. 7,2 mm (part no. 2170205)
Electrical properties at 20°C
Conductor resistance (loop)
max. /km
186
Insulation resistance
min. G x km
5
Mutual capacitance at 800 Hz max. nF/km
60
Characteristic impedance
100 - 120
Attenuation at 100 kHz nom. dB/100m
0,9
Attenuation at 1 MHz nom. dB/100m
2,5
Near-end cross talk attenuation at 1 MHz min. dB
50
Near-end cross talk attenuation at 10 MHz min. dB
40
Transfer impedance at 30 MHz
max. m/m
250
Nominal velocity of propagation nom.
0,66 c
Signal transit time nom. ns/m
5,06
Operating voltage (not for power purposes) peak value V
250
Test voltage (conductor/conductor) V
1500
Test voltage (conductor/screen) V
1000
Mechanical and thermal properties
Permissible temperature range (fixed use) °C
-40 to +80
Permissible temperature range (flexible use) °C
-5 to +70
Minimum bending radius (fixed use) cableØ x
8
Minimum bending radius (flexible use) cableØ x
20
Flame propagation flame retardant to IEC 60 332-1-2
Conformity
This cable confirms to RoHS directive (2002/95/EG)

Summary of content (1 pages)