Datasheet

U.I. Lapp
GmbH
DATA SHEET
Li2YCY single core
DB4550115
valid from: 10/19/2010
Product Developement Cable
Document: DB4550115DE page 1 of 1
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
Application
Li2YCY single core is a screened, single core for wiring of measurement instruments, transmission and receiving equipment,
switch gear cabinets and electrical components. The screening provide protection against electrical interferences.
The cable is used in dry, damp and wet interiors but not appropriate for outside usage.
This cable confirms to RoHS directive (2002/95/EG).
Design
Conductor tinned copper wires, conductor make-up:
0.14 mm²: No. of wires x Ø of wire 18 x 0,10, resistance max. 142.0 Ω/km
0.25 mm²: No. of wires x Ø of wire 14 x 0,15, resistance max. 82.0 Ω /km
0.5 bis 2.5 mm²: according to VDE 0295, class 5
Insualation PE compound
Screen braid of tinned copper wires
Outer sheath PVC TM2 acc. to VDE 0207 part 5
Colour of the sheath: transparent
Electrical properties at 20°
Specific insulation resistance > 2 G Ω x cm
Peak working voltage 500 V (not for power applications)
Test voltage 1200 V
Mechanical and thermal properties
Temperature range Flexing: - 5˚C up to +70˚C
Fixed installation: - 30˚C up to +80˚C
Flammability flame retardant acc. to IEC 60 332-1-2
Design and characteristics is similar to VDE 0812.