Datasheet

U.I. Lapp
GmbH
DATA SHEET
H07Z-K 90°C (X07Z-K 90°C)
DB4726001EN
valid from: 2011-06-07
Originator: T. Merker / PCM
Document: DB4726001EN page 1 of 4
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
APPLICATION (HD 516/VDE 0298-300 & HD 22.9/VDE 0282-9)
High-power current low voltage cable according to the cable type standard HD 22.9 (=VDE 0282-9)
Fix, protected installation and use, and that also in or on luminaries or control and switching devices up
to 1,000 VAC or up to 750 VDC-to-ground
Inside of devices and control cabinets
Places/applications with high concentration of human beings and material assets, where low smoke
density and low emission of corrosive gases are required at in case of fire
Suitability for the laying inside of conduits installed on or under plaster or in similar closed systems
Lifted conductor temperature range compared to standard unprotected single-core single-layer PVC-
insulated hook-up cables, thanks to higher maximum conductor temperature of +90°C
Permitted permanent operation/system voltages:
(Rated IEC voltage class H07) (HD 22.1/VDE 0282-1, HD 22.9/VDE 0282-9):
o Phase/conductor to ground/PE (U
0
) 495 VAC, 742.5 VDC
o Phase/conductor (not PE) to phase/conductor (not PE) (U) 825 VAC, 1237.5 VDC
DESIGN (HD 22.9/VDE 0282-9)
Conductor Copper strands
Conductor class Conductor class 5 according to IEC
60228/VDE 0295: Fine-wired and
flexible for fix laying/static use
Core insulation Extruded, cross-linked, halogen-free
Polyolefin-based compound EI 5 in
line with EN 50363-5/VDE 0207-
-363-5 and HD 22.1/VDE 0282-1
CABLE MARKING / CABLE TYPE CERTIFICATION (HD 22.9/VDE 0282-9)
In case of harmonised versions according to HD 22.9/VDE 0282-9:
o Cable type mark according to HD 22.9/VDE 0282-9: “H07Z-K”
o H07Z-K ◄HAR► cable type certification according to HD 22.9/VDE 0282-9
o ◄HAR► testing and certification mark according to HD 22.1/VDE 0282-1 and HD 22.9/VDE
0282-9