Datasheet

DATA SHEET
703886x
UNITRONIC
®
SENSOR FD UL/CSA Lif9Y11Y
valid from :
19.08.2009
PD-AN, www.lappautomation.com
Document: DB7038864EN page 1 of 2
©2009 Lapp Group Technical changes reserved.
Application
UNITRONIC
®
SENSOR FD UL/CSA Lif9Y11Y is a high-flexible cable for automated assembly to sensor-plug-
cables. Highest emphasis is on optical and stripping-characteristics. Cable is installed highly flexible and with
very small bending radius and, by means of selection of special materials and construction techniques, suitable
for permanently flexing applications. PP-insulation and PUR sheath are halogenfree, cable surface is matt and
highly abrasion resistant. Cable per UL subject 758, CSA 22.2.
Design
Conductor Bare copper wire stranded; class 6 to DIN VDE 0295:
32x0,10 for 0,25mm
2
and 42x0,10 for 0,34mm
2
Core insulation PP Polypropylene UL 10978/CSA C22.2
Core identification As below per order
Outer sheath Special-PUR Ether-PUR halogenfree, Black similar to RAL 9005
Electrical properties at 20 °C
U
0
/U: 300V rated and 600V peak (only for electronic use);per UL
Test voltage 2000 V
Mechanical and thermal properties
Temperature range Fixed installation -40 °C up to +80 °C
Flexible applications -15 °C up to +80 °C
Min. bending radius 5 x Ø for installation and use
Flammability Flame retardant acc. to CSA FT2 – HFT (UL)
Halogenfree Acc. to IEC 60754
Approvals UL/CSA 20549, ROHS
Printing White ink jet
Article No. Type sheath wall thickness Core diameter in mm Outer Diameter
Min average to
UL/CSA mm
7038864 3x0,34 0,5 1,3 4,6
7038865 4x0,34 0,5 1,3 4,7
7038866 5x0,34 0,5 1,3 5,1
7038867 5x0,25 0,5 1,2 4,7
7038868 8x0,25 0,5 1,2 5,9