Technical Manual

MX100 Series - 100 Watt UHF AMPLIFIER
TSM 20-308 rev 1: April 3, 2000 10 100 W UHF Amplifier
GENERAL DESCRIPTION
should an unlikely overheating condition occur.
The amplifier chassis requires 120VAC and+35Vdc. They come from the power supply chassis assembly.
In the amplifier chassis, this +35Vdc is fed to a dual regulator board which supplies regulated +28Vdc to
the amplifier modules. The amplifier cooling fans requires the 120Vac.
The control's 12Vdc linear power supply is rated for 0.9A and is powered upon closing of the power supply
`POWER’ circuit breaker.