Assembly Instructions

MXI1503-2004 CONTROL UNIT
PUB13-09 Rev 1 24
 Active = The internet is currently receiving or transmitting data
 RxD = Data is being received
 TxD = Data is being transmitted
2.9.1 SubMenu Select Buttons
The bottom line represents the menu selection buttons with a possible option of eight different selections. The operator
just needs to press the touchpad (lightly) either on or just above the desired menu select button.
The first seven buttons are involved in setting the Internet address and Mask Addresses. Each of these addresses are
divided into four sections of three digits each. The operator can increment each of these three digit numbers separately
and then move on to the next set if required. Once completed the new values can be saved.
Figure 13 Internet SetUp Submenu Screen
 SetIP = Set a new IP address, Moves cursor to the first 3 digit number (100 in this case)
 Mask = Set a new IP Mask address, Moves cursor to the first 3 digit number (255 in this case)
 INC+ = Increment the current IP or IP Mask number, If current number is 100 then go to 101
 NEXT = Move to the next 3 digit IP number, If at the last digits then nothing is done
 PREV= Move to the previous 3 digit IP number, If at the first digits then nothing is done
 SAVE = Save the new IP or IP MASK address
 CLR = Restore the default IP addresses and discard any changes made
 OUT = Returns LCD to the System Submenu LCD Screen.