Installation & Assembly

PARTS LIST

HARDWARE

Step 1

Step 2

SLAT SECTION

SUPPORT RAIL

TALL SUPPORT LEG

SHORT SUPPORT LEG

2 SET

2 PCS

4 PCS

Allen wrench

Phillips

Customer supplied

screw driver

Allen wrench

1 1/2” Allen screw - 8 pcs

Spare - 1 pc

1 1/4” Wood screw - 8 pcs

Spare - 2 pcs

Allen wrench - 1 pc

Spare - 1 pc

Assemble support legs (03 or 04) and support rail (02).

Using Allen screw (A).

Tighten with the Allen wrench (C).

Repeat for other support rail.

Page 1 of 2

SLAT KIT QUEEN OR KING

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE

ALLEN WRENCH, ALLEN SCREW, OR WOOD SCREWS

ARE DAMAGED DURING ASSEMBLY.

Assemble bed frame according to assembly instructions.

If using mattress and foundation set the bed up low and use short support leg (04).

If using storage drawers choose the tall support leg (03).

ASSEMBLY INSTRUCTION

( QUEEN , KING )

Before assembling your bed slat kit, please read through these

instructions carefully and familiarize yourself with the different parts.

Please note that you will require a Phillips screwdriver and an Allen wrench.

03 / 04

2 1/2” Allen screw

READY

ASSEMBLE

PO :

Adult assembly

PAGE 1
READY SLAT KIT QUEEN OR KING TO ASSEMBLE ASSEMBLY INSTRUCTION ( QUEEN , KING ) Before assembling your bed slat kit, please read through these instructions carefully and familiarize yourself with the different parts. Please note that you will require a Phillips screwdriver and an Allen wrench.
PAGE 2
READY TO ASSEMBLE SLAT KIT QUEEN OR KING A Step 3 Lay the slat section (01) onto the bed. Attach support rail assembly (02) to slat section (01). Using Allen screw (A), tighten with the Allen wrench (C). Repeat for section 2. A 01 A A 02 SECTION 1 1 1/2” Allen screw SECTION 2 C Allen wrench Adult assembly Step 4 Be sure to align slat section evenly with both ends of side rail. Screw slat section (01) to side rail, using wood screw (B). Tighten with Phillips screwdriver. (Customer supplied).