Installation & Assembly

Assembly Instruction
1. Identify all parts packed in carton against the part list. Remove all protective
material carefully and avoid cutting the surface of the furniture while removing
the wrapped material.
2. Adjust foot plug to level the base and turn it on a non-abrasive ,flat surface then
screw down the pole into the base.
3. Make the hole of the table top into the top of the pole and spin it until it tight.
Parts
Description
Quantity
Parts
Description
Quantity
Table top
1
Base
1
Pole
1
Warning: Do not force components and overtighten the nuts during assembly.
Don’t touch the leg when you turn the table top upside down.