Assembly Instruction

ManualsBrandsLark Manor ManualsBedsTrevoux Tufted Upholstered Low Profile Standard Bed

ASSEMBLY

INSTRUCTION

Upper Part of

Headboard

1pc

Slate

3pcs

Lower Part of

Headboard

1pc

Bolt

1/4" x 50mm

20pcs

Left Side Panel

1pc

Flat Washer

1/4"

20pcs

Right Side Panel

1pc

Lock Washer

1/4"

20pcs

Single-Sided

Cover

（In other carton

）

1pc

Allen Wrench

1/4"

1pc

This page lists all the contents included

in the box. Please take the time to

identify the hardware as well as the

individual components to this product. As

you unpack and prepare for assembly,

place the contents on a carpeted or

padded area to protect them from

damage.

Notice: This product need more than 2 people to assemble it.

EASTERN KING HEADBOARD

Summary of content (5 pages)

PAGE 1
ASSEMBLY INSTRUCTION EASTERN KING HEADBOARD A Upper Part of Headboard 1pc B Lower Part of Headboard 1pc F Slate 3pcs G Bolt 1/4" x 50mm 20pcs C Left Side Panel 1pc D Right Side Panel E Single-Sided Cover （In other carton） 1pc H Flat Washer 1/4" 20pcs I Lock Washer 1/4" 20pcs 1pc J Allen Wrench 1/4" 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
1 Attach Upper Part of Headboard (A) to Lower Part of Headboard (B) with Bolt (G), Lock Washer (I) and Flat Washer (H) on holes of Slates (F). Turn the Allen Wrench (J) in Bolt (G). A J G I H F B 2 Put Single-Sided Cover (E) on the front of Headboard (A) & (B). Then stick the velcro at the back of Headboard (A) & (B).
PAGE 3
Attach Left Side Panel (C) & Right Side Panel (D) to the Headboard (A) & (B) with Bolt (G), Lock Washer (I) and Flat Washer (H). Turn the Allen Wrench (J) in Bolt (G). A J G I H D C B Helpful Tip: - After assembly, if fabric is not smooth or wrinkled, please iron it. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
PAGE 4
ASSEMBLY INSTRUCTION KING BED - FOOTBOARD & SIDE RAILS A Footboard B Side Rails 1pc F Screw 20pcs K C Wooden Leg 2pcs G Bolt 2pcs H Bolt D Support Leg 15pcs I Flat Washer 1/4" x 75mm 1/4" x 50mm 2pcs 15pcs 17pcs E Wooden Slats 5pcs J Lock Washer 17pcs Allen Wrench 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 5
1 Attached Wooden Leg(C) to the Footboard(A) use Bolt(G), Lock Washer(J) and Flat Washer(I) on both of holes. Turn the Allen Wrench(K) in Bolt(G).. A C 2 I J Attached Side Rails(B) to the Headboard and Footboard(A). G K B 3 Assembly Support Leg(D) to Wooden Slats(E) use Bolt(H), Lock Washer(J) and Flat Washer(I) by Allen Wrench(K). Assembly Wooden Slats(E) to Side Rail(B) use Screw (F) as showing. K H J I F E D Adjustable Cleaning & Care Treat surface with care.