Installation Manual

Larson Electronics LLC www.LarsonElectronics.com [e-mail]
9419 E US HWY 175, Kemp, TX 75143 - P: [phone] - F: [phone]
LED-DL290
DISASSEMBLY INSTRUCTIONS
To Separate Bezel:
1. Align the indicator marks.
2. Carefully pry between bezel and window inside indicated slot with a flathead
screwdriver.
To Place Bezel back on:
1. Roughly align indicator marks.
2. Press bezel firmly against window until it snaps into place.
2-COLOR OPERATION
Your light offers 2 colors of light output to suit any mood.
1. To select “White” light output, rotate bezel 30 degrees counter-clockwise until the first
detent is achieved.
2. To dim the “White” light output, rotate the bezel an additional 10 degrees counter
clockwise and hold until the desired intensity is achieved then release the bezel.
3. To select the second color and dim, follow the exact instructions above, only start by
rotating the bezel clockwise.
Voltage: 10 to 30 VDC