Specification Sheet

Page: 1
Larson Electronics LLC WWW.LARSONELECTRONICS.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Golight 2020/2067 Controller Mounting Box - GL-2020-D-B
Part #: GL-2020-D-B
Powder coated, stamped steel mounting box. The box is completely enclosed. An access hole in the rear of the unit is large enough to
enable the connectors for the Golight Radioray 2020 and Golight Radioray 2067 to pass through the back.
*DOES NOT INCLUDE WIRED REMOTE CONTROL*
4 of 10-32 machine screws hold the remote to the box. They also secure the rear enclosure to the front of the mounting box.
The box can be used as a handheld dash mount remote or mounted to any surface via 4 10-32 screws
This box has 2 purposes. For those needing a wired handheld remote control for the Golight Radioray 2020 (Golight 2067) or Golight
2020-M (Golight 2067 - magnetic mount), this is an option. Additionally, this mounting box eliminates the need to cut a hole in the
mounting surface (dash etc.). Instead, you can drill 4 small holes and mount the controller. No cut out necessary.
Part #: GL-2020-D-B (317)