Specification Sheet

Page: 5
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
CONDITIONS
Vin min (V) = 9 toff (us) = 2.9
Vin nom (V) = 12 R1 (kohm) = 50.2
Vin max (V) = 32 L1 (uH) = 3.0
Vo min (V) = 6.5 L-Pk (A) = 2.9
Vo nom (V) = 6.8 L-rms (A) = 2.9
Vo max (V) = 7 Ipk (A) = 2.5
I-LED (A) = 2.2 R2 (ohm) = 0.10
Efficiency = .85 I-FET (A) = 2.2
fsw nom (kHz) = 150 fs min (kHz) = 77
Ts nom (us) = 6.666667 fs max (kHz) = 301
Base frequency- = 36~37Khz @ 12V
Amplitude of pulse width- = 27Ms
Outside: External dimmer- = 500Hz
Inside : Current sensing from- 77KHz at 12V to 300KHz at 50V
Specifications / Additional Information
LEDP1X10WRE-RND-C LED Light Internal LED Driver Features
Lamp Type: CREE XLamp XM-L® LED Fast average current control
Dimensions: 3.7"-OD x 4.5"-H x 3.8"-D Programmable off-time switching
Watts: 10 Linear dimming input
Led Drive %: 90% PWM dimming input
Voltage: 12-32 V DC Short Protection w/ Skip Mode
Spot Beam: 650' L< Ambient Op Temp -40C to +85C
Flood Beam: 70' L x 65' W Pin-compatible with the HV9910B
Lighting Configuration: 10° Spot, 20° Wide Spot, or 60° Flood CE Certified
Mounting: Adjustable Trunnion Bracket
View Avg-Mode Driver Control PDF
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 0.84 @ 12V DC - 0.42 @ 24V DC
Lumens: 860 Special Orders- Requirements
LED Light Color: 6000K - Red, Blue, or Amber w/ Diffuser Contact us for special requirements
LED Life Expectancy: 50,000 hours Toll Free: 1-800-369-6671
Materials: Aluminum Housing, Polycarbonate Lens Intl: 1-903-498-3363
Housing Colors: Black or White E-mail: [e-mail]