Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Made in the USA
The Larson Electronics MGS-DC-30KVA-480-220-110 heavy duty power transformer substation converts 480 VAC single phase or three
phase electrical current to single phase 120V AC and 240V AC. This unit provides operators the ability to safely tap into and distribute
480VAC power from a variety of sources including generators and direct grid power.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION SYSTEMS*
The MGS-DC-30KVA-480-220-110 portable power transformer provides a safe and reliable way for operators in industrial settings to tap into and
utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds,
maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power
sources. This portable transformer system is designed to operate with 480 VAC which it then steps down to 120 and 240 VAC. This transformer
makes 120VAC available via ten GFCI protected receptacles and 240VAC available via two 240VAC outlets. This portable power distribution
system also provides a 480 Volt feed through for a welding substation.
Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge
The MGS-DC-30KVA-480-220-110 converts 480 VAC three phase or single phase to single phase 120V AC and 240V AC and provides 30 KVA.
Protection is provided through the use of 12 GFCI protected outlets and integral breaker boxes on both input and line outs. 20' of #4 SOOW
cable connects to a fused ON/OFF disconnect switch that controls power to the 30 KVA, 480 Volt Transformer. The transformer and distribution
assembly is mounted onto a rugged carbon steel frame with integrated skid pockets and a top located lifting eyelet to allow easy transport.
Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is
designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer
is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to a 2" by 2" by 1/8" thick
square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. The entire frame is
powder coated with glossy blue finish for corrosion resistances and aesthetics. This model is equipped with forklift skid pockets and a top located