Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
2' LED Light Tube - Replaces F17 T8 Bulbs - 50,000 Life Hours - 14 Watts - 1260 Lumen
Part #: LEDT-14W
Buy American Compliant
The Larson Electronics LEDT-14W 14 watt T-series LED tube lamp works with T8 fluorescent light fixtures. Ideal for use in our EPL-24,
HAL-24, and HALP-24 explosion proof fixtures, it is also an excellent choice for upgrading existing fluorescent lamp fixtures to LEDs
as well as a direct replacement for any of our own LED fluorescent light fixtures.
This 14 watt LED tube lamp can be configured for any T series fluorescent bulb fixture and requires no ballast. Internally, you simply bring the
black wire to one end and the white wire to the other. The polycarbonate lens diffuses the light and makes this bulb ideal for food safe
environments as there is no glass. The aluminum housing serves as a heat sink and provides rigidity and strength for this LED bulb. These LED
light tubes can also be plugged directly into fluorescent T8 light fixtures with magnetic ballasts, which make them an ideal retrofit upgrade for
older T12 fluorescent lights with magnetic ballasts.
In fluorescent light fixtures with electronic ballasts, the operator needs to bypass the ballast and wire the power directly to one or both ends of the
LED tube (black wire to one end and white wire to the other). Thus, this is an ideal upgrade for 2 foot fixtures with failed ballasts. These multi-
voltage LED fluorescent bulbs run directly off any voltage ranging from 110 volts to 277 volts, including 120 volts, 230 volts, 277 volts, etc. We
now offer 12/24 volt LED T-series bulbs as well.
Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge