Specification Sheet

Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
This units’ reflector is designed to provide maximum efficiency and power by capturing and focusing all of the light produced by the 35 watt HID
bulb. The shallow convex lens produces minimal light loss and beam spillage with over 90% of the produced light concentrated and focused.
While many typical spotlights lose as much as 50% of their output to light escaping around the lens and creating beam spillage, our spotlight
produces a well focused and directed light beam of excellent whiteness, intensity and power. The 35 watt bulb in this unit is rated at 4500 hours
of operational life and produces 3,200 lumens.
The HL-85-HID-110V is designed to operate with on 110 volts AC, draws 0.52 amps at start for 60 seconds and 0.36 amps continuous, and is
equipped with a 25 foot cord with an inline transformer and ending in a standard socket plug. Alternately the cord on this HID spotlight can be
disconnected and any 12-24VDC power source can be supplied to the light. A booted push button switch provides easy one finger operation and
the no-slip textured surface of the handle provides a sure grip even in wet conditions. A lanyard attachment at the top of the handle adds further
protection against dropping should operators lose their grip.
The ergonomic handle is 4.5 inches long, 1.5 inches deep and 5/8 inch thick and 3/8-16 inch brass nut fixture embedded in the base of the
handle allows operators to attach a magnetic base like our MM-2 or MM-5 to the light. This feature also allows the light to be mounted to a
standard tripod as well. The HL-85-HID spotlight is designed for easy field maintenance with simple internal connectors accessed through the
snap in base at the bottom of the handle and a lamp housing that is easily removed to access the bulb and wiring. No tools are required to
change any part of the light including the bulb.
We also now offer a 5 inch diameter and a 7 inch diameter lens. Although the difference is not significant, the 5 inch lens produces a tighter spot
beam while the 7 inch lens produces a wider coverage flood pattern.
Specifications / Additional Information
HL-85-HID-110V High Voltage Spotlight Features
Lamp Type: High Intensity Discharge (HID) High Output 35 Watt HID Bulb
Dimensions: Handle- 4.5"-L 1.5"-Depth 5/8" W Lightweight Ergonomic Design
Weight: 14.Oz No Tools Field Serviceable
Watts: 35 watts 25 Foot Cord
Voltage: 110V AC Heavy Duty Nylon/ Polycarbonate Construction
Output:: 3200 Lumens 110VAC and 12/24 Volt DC
Lamp Life Expectancy: 4500 Hours 15 Million Candlepower
Beam Lux in Spot: At 10 Ft: 5,080 At 15 Ft: 3,560 Power Supply UL Listed for USA / Canada
Beam Lux in Flood: At 10 Ft: 1,890 At 15 Ft: 1,188
Cord : 25 foot cord w/ inline transformer Special Orders- Requirements
Beam Type : Adjustable, Spot or Flood Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
CE Certified E-mail: [e-mail]
3 year warranty replacement on this HID light. After 30 days, the
customer ships the failed light to Larson Electronics at their expense. If
the failure is a manufacturer defect, we will ship a new replacement to
the customer. If failure occurs within 30 days of receipt, Larson
Electronics will provide a return label via email to the customer. When
the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-