Installation Manual

Larson Electronics LLC www.LarsonElectronics.com [e-mail]
9419 E US HWY 175, Kemp, TX 75143 - P: [phone] - F: [phone]
GVP-24-2L-LED
CAUTION
 Risk of fire/electrical shock. If not qualified, consult an electrician.
 Disconnect power at fuse or circuit breaker before installing or servicing.
 Edges may cut. Handle with care.
SAFETY INSTRUCTIONS (Read Carefully for your Protection)
 ETL listed for indoor use only.
 Connect fixture to 120-volt, 60Hz power source. (Any other connection may void warranty.)
 A qualified electrician or person with experience in household wiring should install this fixture.
The electrical system and the method of connecting to electricity must be in accordance with
the National Electrical Code and local building codes.
 Keep away from flammable objects. Do not position fixture within one inch of any combustible
materials.
 Your light fixture is prewired for easy installation.
 This fixture is rated for 50,000 hours.
 Wear rubber sole shoes and work on a sturdy wooden ladder.
 To avoid hazard to children, account for all parts and destroy packing materials.
PREPARATION
 Before beginning assembly, installation, or operation of product, make sure all parts are
present. Compare parts with the package contents list and diagram.
 If any part is missing or damaged, do not attempt to assemble, install or operate the product.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Light does not come on
No power to the fixture
Check if circuit breaker is tripped
Wiring to the unit is loose
---
Confirm fixture is properly grounded
QUESTIONS, PROBLEMS, MISSING PARTS
Before returning your fixture, please call Larson Electronics at 1-800-369-6671 or log on to
http://www.larsonelectronics.com for replacement parts.
WARNING
 Always hire a licensed electrician for proper installation.
 Always mount this fixture to a grounded junction/breaker box.