Specification Sheet

Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
from the handle assembly, enabling the operator to replace the bulb when necessary.
Read the Wild Hog Hunters review of this light.
The HL-85 is an ultra-durable handheld spotlight that weighs only 13 ounces, which makes it easy to carry and operate. The unit is balanced for
ergonomic comfort and handling. The handle is 4.5 inches long, 1.5 inches deep and 5/8 inch thick, making it easy to hold, even in wet, slippery
conditions. The nylon handle has a no-slip textured surface to improve grip as well. The booted push button is conveniently placed so the user
can easily access the switch with their fore finger for quick on/off action.
We have changed the wiring and the plug on the current model. Internally, we added 2 strain reliefs and a wire tie. Externally, we modified the
coil cord setup. The previous coil cord had a multi-layer jacket. We have switched to a single SPT-2 jacket, bringing the cord all the way into the
Deutsch plug terminals. This should prevent any failure issues that occur when the operator is compelled to stretch the cord beyond its limit.
A 3/8-16 inch brass nut fixture is imbedded in the base of the handle enabling the operator to mount a magnetic base, like our MM-2 or MM-5 to
the light. Alternatively, the operator can tripod mount this light as well. It also comes equipped with a lanyard attachment at the top of the handle
for users that want to secure the light in the event they lose their grip.
Each Larson Electronics spotlight comes with a detachable 16 foot coil cord with cigarette plug. The cord is detached via a weatherproof, 2 pin
Deutsch connector which easily and securely attaches and detaches the coil cord from the spotlight. The plug contains a 15 amp fuse. Other
cords are also available for purchase including a 21 foot cord with ring terminals, 21 foot cord with spring battery clamps and 16 or 25 foot
straight cord with a cigarette plug.
This spotlight can be configured to operate on 12 volts at 8.5 amps or 24 volts at 4.25 amps. This is done by using a 12 volt, H3 bulb or 24 volt,
H# bulb. H3 replacement bulbs are readily available at any automotive store in the US. All consumer vehicles use 12 volts DC. Most military
vehicles use 24 volts DC. There is no difference in light output, its only the matter of choosing the right voltage for your vehicle.
5 inch lens Click Photos to Enlarge 7 inch lens (Optional)
We also now offer a 5 inch diameter and a 7 inch diameter lens. Although the difference is not significant, the 5 inch lens produces a tighter spot
beam while the 7 inch lens produces a wider coverage flood pattern
Note on Voltage: Most vehicles are 12 Volt DC. 24 Volts DOES NOT mean more power. Running a 24V light from a 12V power source will
result in a very dim or non-functioning light, and may cause internal damage to the light as well. For common vehicle use, please order 12V.