Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
spotlight configuration, more than 90 percent of the emitted light is captured and focused. A side benefit of this is a reduction of “casting,”
a phenomenon that occurs when the light “spills” around the light source. Often times, when surrounded by water, snow or other reflective
surfaces, the light spillage will cause “casting” which effectively prevents the human eye from adjusting and seeing the objects at distance
the spotlight was used to see.
The operator can lift the locking tab behind the lamp housing and rotate the lamp head. Rotating the housing enables the operator to
adjust the beam from a wide, soft flood pattern to a tight, spot beam to goes out 900 feet. Continued rotation to the extreme disconnects
the lamp head from the handle assembly, enabling the operator to replace the bulb when necessary.
This ultra-durable handheld spotlight weighs 1 pound 12 ounces, which makes it easy to carry and operate. The unit is balanced for
ergonomic comfort and handling. The ergonomic handle is 4.5 inches long, 1.5 inches deep and 5/8 inch thick, making it easy to hold,
even in wet, slipper conditions. The nylon handle has a no-slip textured surface to improve grip as well. The booted push button switch is
conveniently placed so the user can easily access the switch with their fore finger for quick on/off action.
A 3/8-16 inch brass nut fixture is imbedded in the base of the handle enabling the operator to unscrew the magnetic base when not
needed.
The Larson Electronics spotlight is designed for easy field maintenance. Simple internal connectors are accessed through the snap-in
base at the bottom of the handle. The lamp housing is easily removed to access the bulb and wiring. No tools are required to change any
part of the light, including the bulb. This Larson Electronics is truly field serviceable, without tools under any conditions.
This Larson Electronics spotlight has a lanyard attachment at the top of the handle for users that want to secure the light in the event they
lose their grip.
Each Larson Electronics comes with a detachable 16 foot coil cord with cigarette plug. The cord is detached via a weatherproof, 2 pin
connector which easily and securely attaches and detaches the coil cord from the spotlight. Other cords, including 21 foot cords with ring