Specification Sheet

Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Click Photo to Enlarge
Mounting: The LEDWL-FKLT-BLUE is suspended within a form fitting trunnion (yolk-type) mount. This trunnion mount has two knurled knobs
that can be loosened, allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A
single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the light using a simple through-hole mount,
allowing the unit to be installed anywhere a 1/2-inch hole can be drilled.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and
floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most
LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the
model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam,
modulating, IR/Visible combos) will have different Deutsch connectors.
Specifications / Additional Information
LEDWL-FKLT-BLUE LED Light Internal LED Driver Features
Lamp Type: Blue LED Fast average current control
Dimensions: 6"-H x 3.91"-W x 3.59"-D Short Protection w/ Skip Mode
Watts: 2 lbs Ambient Op Temp -40C to +85C
Voltage: Universal 9-60V DC Pin-compatible with the HV9910B
Watts: 25W Warn Pedestrians of Oncoming Forklifts
Lumens: 2,250 Visible With High Illuminate Warehouse Lighting
Luminous Efficacy: 90 Lm/W CE Certified
LED Light Color: Blue EMC Certified
LED Life Expectancy: 50,000 hours EMI Certified
Led Drive %: 90%
View Avg-Mode Driver Control PDF
Lighting Configuration: Combo 10° Spot & 60° Flood
Amps: 2.09 @ 12V DC - 1.05 @ 24V DC
Ambient Operating Temp Range: -40° C to +80°C
Housing Material: Die Cast Aluminum
Housing Colors: Black