Instructions / Assembly
7
Extend housings to the left and right evenly until
snug to the door inside trim.
Drive sill screws 4" from either end
and 10" to the left and right of center.
STEP 3
SECURE SCREEN
Insert a housing screw into the pre-drilled
screw hole at the top of the housing
flanges on both sides to hold frame in
place. Do not tighten completely.
Center sill plate assembly on the door
sill. Slide sill plate assembly extenders to
each side to fill gaps.
Center sill plate assembly on the door sill. Slide sill
plate assembly extenders to each side to fill gaps.
Interior View
4" 10" 10" 4"
NOTE: For a tailored fit around door
moldings, notch each plastic
sill plate extender using a
utility knife. See page 8