Owner Manual

4
IDENTIFYING SILL TYPE
IDENTIFYING DOOR TYPE
FLUSH SILL
Sill is flush with the
exterior trim
EXTENDED SILL
Sill extends past the
exterior trim
SHORT SILL
Sill stops short of the
exterior trim
A filler board is not needed when short sills have ground directly underneath sill.
A filler board (not included) is needed when a short sill sits on top of a step.
Cut the filler board and place under the trim so the top of the filler board is even with the sill.
FILLER BOARD
RIGHT/LEFT
INSWING
Screen assembly
will mount outside
of home
NOTE: Handle modifications will be required to
move the lock mechanism to the inside of the
home. This step should be completed after the
retractable screen is installed (see page 10).
RIGHT/LEFT
OUTSWING
Screen assembly
will mount inside
of home
Before you begin installing your new retractable screen door, it is important to
identify your sill and door type. If you have a short sill or an outswing door, you may
need to make some modifications before proceeding to the installation steps.