Owner Manual

5
MEASURING DOOR TRIM OPENING
LEFT HINGE DOOR RIGHT HINGE DOOR
The screen door is designed to fit door openings between 32” and 36” without
modifications. If the door opening measures less than 32” wide, the top and
bottom tracks will require cutting.
Narrow Door Modification (If needed)
Measure the current door trim opening and subtract that width from the standard
32” width to calculate the total amount to be cut (example: 32” - 30” for a total of
2” to be cut)
Cut the calculated amount from one end of each track, creating a straight cut.
a. The Screen Housing should
be oriented to the hinge side
of the door.
TIP: Place housing face down
on a soft surface to protect
the finish during assembly.
EXAMPLE
32”
- 30”
= 2”
standard door width
existing door width
total amount to be
cut from the ends of
the top and bottom
tracks
1
ASSEMBLE COMPONENTS