Owner Manual

7
1
2
ASSEMBLE COMPONENTS (CONTINUED)
INSTALL SCREEN
d. Insert the ends of the top and bottom Tracks into
the Decorative Housing.
If the top and bottom Tracks have been shortened
(see page 5), insert the cut ends of each Track into
the Decorative Housing.
a. Push Decorative Housing and Screen Housing together
so the width of the screen frame is at its narrowest.
Place screen assembly onto door sill. (See page 2 for
mounting instructions).
For flush and short sills, the bottom edge of the sill
should be fully supported by filler board or ground. For
long sills, the assembly rests on top of the sill.
SURFACE MOUNTING AN INSWING DOOR
NOTE: construction styles may vary.
1 1/4"
3/4"
2 3/16"
32'' - 36'' EXPANDABLE
UNDER 32'' WITH MODIFICATION