Owner Manual

8
2
3
INSTALL SCREEN (CONTINUED)
SECURE SCREEN
b. Extend Housing to left
and right evenly until both
flanges are snug to the
edges of the door jamb.
a. Insert screws into the pre-drilled screw holes in the
Screen Housing and Decorative Housing flange to
hold the frame in place. Do not over tighten.
b. Center the Sill Plate
Assembly on the door sill and
slide the Sill Plate Extender to
each side to fill gaps.
NOTE: For a tailored fit, use a
scissors to trim each Sill Plate
Extender.
#6 x 1-1/4”
Housing Screws
Qty: 4