Datasheet

ManualsBrandsLASCAR ELECTRONICS ManualsEnvironmental Testing EquipmentEasylog Temperature Data Logger

EL-USB-1-LCD

Temperature Data Logger

with LCD

Specications liable to change without prior warning Issue 3 03/2011 S.L Applies to EL-USB-1-LCD Page 1 of 5

FEATURES

• -35 to +80°C (-31 to +176°F) measurement range

• USB interface for set-up and data download

• User-programmable alarm thresholds

• Status indication via red, green and orange LEDs

• High contrast LCD, with two and a half digit temperature

display function

• Immediate, delayed and push-to-start logging

• Supplied with replaceable internal lithium battery and

Windows control software

ORDERING INFORMATION

Standard Data Logger

(Data Logger, Software on

CD, Battery)

Replacement Battery

EL-USB-1-LCD

BAT 3V6 1/2AA

www.lascarelectronics.com

This standalone data logger measures and stores up to 16,378 temperature readings over a -35 to +80°C (-31 to +176°F) range. The user

can easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and running

the purpose designed software under Windows 2000, XP, Vista, and 7. Data can then be graphed, printed and exported to other applications.

The high contrast LCD can show a variety of temperature information. At the touch of a button, the user can cycle between the current,

maximum and minimum stored temperatures. The data logger is supplied complete with a long-life lithium battery, which can typically allow

logging for up to 1 year. The data logger is protected against moisture to IP67 standard when the protective cap is tted.

* At 25°C and 1 minute logging rate

Specications Minimum Typical Maximum Unit

Measurement range -35 (-31) +80 (+176) °C (°F)

Internal resolution 0.5 (1) °C (°F)

Accuracy (overall error) ±0.5 (±1) ±1.5 (±3) °C (°F)

Logging rate every 10s every 12hr

Operating temperature range -35 (-31) +80 (+176) °C (°F)

1/2AA 3.6V Lithium Battery life 1* Year

Lascar’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the control software runs

under Windows 2000, XP, Vista & 7. The software is used to set-up the data logger as well as download, graph and export data to Excel.

EL-WIN-USB (CONTROL SOFTWARE)

The software allows the following parameters to be congured:

• Logger name

• °C, °F

• Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)

• High and low alarms

• Immediate, delayed and push-to-start logging

• Display off, on for 30 seconds after button press, or permanently on

• Data rollover (allows unlimited logging periods by overwriting the oldest

data when the memory is full)

The latest version of the control software may be downloaded free of charge from www.lascarelectronics.com

Summary of content (5 pages)

PAGE 1
EL-USB-1-LCD ORDERING INFORMATION Temperature Data Logger with LCD Standard Data Logger EL-USB-1-LCD (Data Logger, Software on CD, Battery) Replacement Battery BAT 3V6 1/2AA FEATURES • -35 to +80°C (-31 to +176°F) measurement range • USB interface for set-up and data download • User-programmable alarm thresholds • Status indication via red, green and orange LEDs • High contrast LCD, with two and a half digit temperature display function • Immediate, delayed and push-to-start logging • Supplied with
PAGE 2
EL-USB-1-LCD Temperature Data Logger with LCD DISPLAY AND STATUS FUNCTIONS The EL-USB-1-LCD features a high contrast LCD and two LEDs. The LCD shows logged temperature values and can also show information regarding the logging status. Maximum logged value symbol Negative symbol Minimum logged value symbol Reading Temperature scale The LCD shows three different recorded readings, which can be cycled through using the built-in push button.
PAGE 3
EL-USB-1-LCD Temperature Data Logger with LCD LED FLASHING MODES EL-USB-1-LCD features two LEDs that indicate the logging, battery and alarm status: • The first LED flashes red (R) to indicate that the EL-USB-1-LCD is in an alarm condition. It will flash when the logged temperature has exceeded a Low or High alarm level. • The second LED flashes green (G) to indicate that the EL-USB-1-LCD is not in an alarm condition.
PAGE 4
EL-USB-1-LCD Temperature Data Logger with LCD DIMENSIONS 25.3 (1.04) All dimensions in mm (inches) 22.1 (0.87) 119.5 (4.7) MEASUREMENT ACCURACY EL-USB-2-LCD Accuracy (°C) ± 2.0 ± 1.5 ± 1.5 ± 1.0 ± 1.0 ± 0.5 ± 0.5 ± 0.0 -40 -20 0 20 40 60 80 ± 0.0 -35 Temperature (°C) 0 50 80 BATTERY REPLACEMENT We recommend that you replace the battery every 12 months, or prior to logging critical data.
PAGE 5
EL-USB-1-LCD Temperature Data Logger with LCD THE EASYLOG USB RANGE Each EL-USB data logger features the direct-to-USB connection and easy-to-use functionality that the range is known for. The range comprises of the following data loggers: Part No Function Accuracy (overall error) Range Typ. Max. Readings Battery Battery Life* EL-USB-1 Temperature -35 to +80°C (-31 to +176°F) ±1ºC (±2ºF) 16,382 3.6V ½AA 1 Year EL-USB-1-LCD Temperature with LCD -35 to +80°C (-31 to +176°F) ±0.