User manual

www.lascarelectronics.com
This Help Guide refers to the EasyLog USB Data Loggers
Issue 1_06-2016
Page 12 of 24
EASYLOG SOFTWARE GUIDE
To delay the start of the data logger to a preset time and date, select that option and select the Start Time
(hh:mm:ss format) and Start Date (dd/mm/yyyy format) at which you want to start logging, and click on the
Finish button.
To select the Start Time, highlight that part of the time (hh, mm or ss) that you want to modify. That part
will turn blue. Use the up and down arrows to increase or decrease the selection.
To select the Start Date, click on the down arrow next to the date. This opens up a calendar which allows
you to select a date in the future. The current date is circled. Use the left and right arrows at the top of the
calendar to navigate through the months. Click on the required start date, then click on the Finish button.
Some data loggers
allow you to start, stop
and then re-start data
logging without the
need for a PC.