User manual

www.lascarelectronics.com
This Help Guide refers to the EasyLog USB Data Loggers
Issue 1_06-2016
Page 24 of 24
EASYLOG SOFTWARE GUIDE
The USB device currently connected is not compatible with this version of the software.
Contact your supplier for further assistance.
(See About box for contact details)
This error message appears when the USB data logger requires a later version of the EasyLog USB
software than is currently installed on your computer. Download, install and use the latest EasyLog
USB software version from www.lascarelectronics.com.
Note: If you have a 21CFR data logger, then do not use the EasyLog USB software.
Instead, download, install and use the latest version of the EasyLog 21CFR software from
www.lascarelectronics.com.
The USB Data Loggers part of the FAQs section at www.lascarelectronics.com is a valuable source of
practical information about EasyLog data loggers and the EasyLog USB software.
Microsoft, Windows and Excel are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.