User manual

www.lascarelectronics.com
This Help Guide refers to the EasyLog USB Data Loggers
Issue 1_06-2016
Page 8 of 24
EASYLOG SOFTWARE GUIDE
Depending on the data logger that you are using, you will be able to select one or more settings. Follow
the on-screen instructions in consultation with the data logger’s technical datasheet to configure the data
logger correctly for your application.
Some data loggers offer a fixed choice of scale, others allow you to choose your own sensor type and
measurement unit.
Some data loggers offer a choice between standard calibration and custom calibration. Select your
preference and enter the requested calibration data.
Where modes of operation are offered, select the one that fits your application, and apply the required
settings.
Some data loggers within the EasyLog range allow you to specify when the LCD and LED backlighting
operate. This may reduce the power consumption of the device and extend the battery life.
Some data loggers offer a choice of behavior when the memory is full. Either the data logger is set to stop,
or it can be configured to overwrite the oldest data, which are then lost.