AO-EZCAMEL-T 1.
AO-EZCAMEL-T Overview Function Snapshot Button Take snap image with one click when running application program. Focusing Knob Adjust focus for clear image. LED LED lights. Tilt Head Provides 90 degree tilt range. Swivel Base Pivots full 360 degree rotation. Base Can be used as a stand/clip dual purpose base. LED Control For switching ON / OFF the LED lights.
AO-EZCAMEL-T Webcam Installation Notes: Device driver is not required for running this webcam with Windows 2000 or later Windows Operating Systems. • Unpack the webcam from package. • Connect webcam to an available USB port on the computer. • Computer will automatically detect the webcam. • Open My Computer to check installation. • When webcam is properly detected by the computer, a USB Video Device will appear under the Scanners and Cameras list, as shown in picture below.
AO-EZCAMEL-T Application installation Attention: 1.3m Smart View Webcam must be connected to the computer before installing the application. Operating System: Windows XP SP2 English Version Step 1 Please run the setup.exe under the installation directory Step 2 Click on “Next" to start installation.
AO-EZCAMEL-T Step 3 Select the installation path, click on “Next" to continue with the installation. Step 4 Click on “Install" to start the installation.
AO-EZCAMEL-T Step 5 Click on “Finish" to complete the drive installation. Notes: Please restart your computer after installation is completed. Uninstall Application Please use uninstall.exe under the program directory.
AO-EZCAMEL-T Application Functions File Devices Options Menu bar Function Set Capture File… Set filename of captured video. Allocate File Space… Set maximum disk space in MB to be used for the capture file. Save Captured Video… Save the captured video. Exit Exit the application program. USB Video device The connected video device will be automatically detected and enabled. USB2.0MIC The connected audio device will be automatically detected and enabled. Preview Enable / Disable preview.
