USER MANUAL NAVCAM-616GPS IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS - Read all instructions carefully before use. - Retain this manual for future reference. - Use this product only in the manner described. - Only use a water-dampened soft-cloth to clean the surface of this product. - The following will damage this product: water or moisture ingress, exposure to prolonged extreme heat or cold; excessive humidity, dust or sandy. - There are no user serviceable parts in this product.
USER MANUAL NAVCAM-616GPS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS WHAT’S IN THE BOX MICRO SD CARD REQUIREMENTS CAMERA BUTTON AND HARDWARE OVERVIEW WHAT DO THE BUTTONS DO? ON SCREEN DISPLAY WHAT DO THE LED INDICTORS MEAN? OPERATING THE NAVCAM-616GPS FOR THE FIRST TIME POWER ON/OFF (AUTO ON/OFF) ABOUT GPS SIGNAL RECEPTION RECORDING FILES AUTO RECORD WHEN TURNED ON PLAYING BACK A RECORDED FILE DELETING A FILE EMERGENCY VIDEO RECORDING AUTO BUMP FILE RECORD (G SENSOR) - SAVING RECORDIN
USER MANUAL NAVCAM-616GPS IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS - Read all instructions carefully before use. - Retain manuals for future reference. - Use this product only in the manner described. - Only use a water-dampened soft-cloth to clean the surface of this product. - The following will damage this product: any liquid such as water or moisture, extreme heat; cold; humidity, dusty or sandy environments.
USER MANUAL NAVCAM-616GPS CAMERA BUTTON AND HARDWARE OVERVIEW 1 Bracket interface 9 LED screen 2 USB interface 10 OK button 3 Speaker 11 Up button 4 LED Lamp 12 Down button 5 TF card slot 13 Emergency record button (SOS) 6 Power button 14 MODE Button (P) 7 Menu button (M) 15 Reset (R) 8 LED indicator lamp 16 Microphone 4
USER MANUAL NAVCAM-616GPS WHAT DO THE BUTTONS DO? Button Button Name Video Mode Photo Mode Playback Mode On / Off – On / Off – Press Press and hold and hold to turn to turn On and On and Off Off Power On / Off – Press and hold to turn On and Off M Mute (While recording) Setting (Recording stopped) Setting Setting OK Start /Stop recording Take a photo Confirm Page Down Zoom in Zoom in Next file Page Up Zoom out Zoom out Previous file P Switch modes Switch modes Switch modes Emerg
USER MANUAL NAVCAM-616GPS ON SCREEN DISPLAY 1 HOME SCREEN (IN RECORD MODE) Exposure compensation 2 Sound recording 3 Loop recording 4 Recording 5 Recorded time 6 Recording resolution 7 Motion detection 8 SD card status (inserted) 9 Power status (charging) PHOTO SCREEN (PRESS PLAY FROM THE MENU SCREEN) 1 Photo mode 2 Qty photos taken 3 Photo resolution 4 Time of cycle taking photo 5 SD Card (logo indicates inserted) 6 Battery status indicator PLAYBACK SCREEN (RECORDING STOPPED) 1 Menu S
USER MANUAL NAVCAM-616GPS WHAT DO THE LED INDICTORS MEAN? Indicator Solid Green Flashing Green Status Camera is turned On. Camera is recording OPERATING THE NAVCAM-616GPS FOR THE FIRST TIME Connect a USB car charger to the car’s 12v Cigarette lighter socket and the other end to the Micro USB port on the NAVCAM-616GPS. Insert a Micro SD card into the Micro SD slot and turn the device on. When the ignition is turned on, the NAVCAM-616GPS will turn on.
USER MANUAL NAVCAM-616GPS The recorded files are saved to micro SD Card. Recording can be stopped, by either pressing the OK button or by turning the car ignition off (stopping power to the device) The NAVCAM-616GPS supports cycle recording. It will overwrite the oldest video files with new ones. Depending on the size of the memory card and the speed rating of the card, there may be as much as a 3 second pause whilst old files are selected and overwriting begins with newer files.
USER MANUAL NAVCAM-616GPS USER SETTINGS From the main screen, press the MENU button, then using a combination of the arrow keys and the OK button to confirm your choice, select settings from the following options list: Feature Options Size (Video Resolution) 1080p 30fps 720p 30fps Time Stamp Off / Date Only / Date & Time Loop Recording Audio Record EV Motion Detection Description Change the resolution of recorded files (Note: Higher Resolution files take up more storage space) Select On / Off to ad
USER MANUAL NAVCAM-616GPS Auto Off If no buttons have been pressed and if no recording is taking place, the unit can be shut off automatically after set periods of time Select between 1, 3, 5 mins or [turn feature] Off. Screen Off Turn the screen light on or off according to your driving situation Select between 1, 3, 5 mins or [turn feature] Off. Power delay Keep camera on after car is turned off Select between 10, 20, 30 seconds or [turn feature] Off.
USER MANUAL NAVCAM-616GPS THE GPS SOFTWARE - OVERVIEW 1 Select AVI File Click to choose an AVI file for playback. Note: Files for playback should be saved to the local hard drive.
USER MANUAL NAVCAM-616GPS FAQ Fault The device has frozen / stopped working. The device will not start recording, or stop recording or has other intermittent faults The speaker warning sounds are a little loud. Can you turn them off? Device does not turn off Cant playback the .AVI video files My video/pictures of an incident are NOT there Can’t see the device in my computer Suggestion Check the speed of your memory card.
USER MANUAL NAVCAM-616GPS PRODUCT SPECIFICATIONS LCD Screen 2.31” TFT Colour LCD Display Video Resolution Built-in Speaker / Microphone 1920 x 1080P 30 frames/s, 1920 x 720P 30 frames/s Yes / Yes Auto Recording on power-up Yes. Recording starts on ignition power (Charging socket) Date / Time stamp Supported – on video and on photos GPS location and Speed stamp Supported – on video Power off auto save Yes. Current file will auto save when power is turned off.
USER MANUAL NAVCAM-616GPS Warranty Against Defects Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
