Manual RGB Smart Light TAP HERE 1 GET THE APP QR Codes for Downloading Apps 2 REGISTER no account LOGIN existing account 3 RECOMMENDED APP SETTINGS REGISTER OR LOGIN TO APP
4 CONNECTING LIGHT TO APP METHOD ONE EASY BLUETOOTH + WIFI Connect Light to Power Turn on Bluetooth on your Smart Phone TIP If setting up multiple lights, please connect one at a time. TIP If device not found please check Only 2.
METHOD TWO WIFI Devices with Batch Numbers 1902223 - 2002857 use Method TWO only. If light not flashing turn ON/OFF 3 times. TIP If light not flashing turn ON/OFF 4 times Connect Light to Power TIP If setting up multiple lights, please connect one at a time (unplug other lights if on same switch) TIP If device not found please check Only 2.
6 LIGHT SETTINGS SCROLL DOWN 7 REMOVING LIGHT TROUBLESHOOTING The device is not connecting to the APP: The light is blinking slowly and will not pair: 1. Check your Wifi username and password are correct and you are only using 2.4 Ghz Wifi connections as the 5Ghz band is not supported. 1. The light might be in AP pairing mode. You can pair the light in AP Mode by switching from EZ Mode to AP Mode on the “Reset the Device first” screen in the APP. 2.
