User manual

ThermoMaster
09
GB
09
The device should be checked regularly to ensure it is functioning correctly. Calibration intervals of
1 year are recommended.
!
Technical data
Measuring range, measuring system -50 °C … 1300 °C
Accuracy, measuring system
-50 °C … 0 °C
0 °C … 1000 °C
1000 °C … 1300 °C
±2 °C
±(0.5 % of displayed value +1 °C)
±(0.8 % of displayed value +1 °C)
Resolution 0.1 °C/1 °C selectable
Unit of measurement °C/°F selectable
Measuring range, thermocouple
ThermoProbe K ThermoSensor Air
ThermoSensor Tip
-50 °C ... 800 °C
-50 °C ... 800 °C
-50 °C ... 800 °C
Accuracy, thermocouple
ThermoProbe K ThermoSensor Air
ThermoSensor Tip
±2.5 K (-50 °C … 200 °C)
±2.5 K (-50 °C … 333 °C)
0.75 % (333 °C … 800 °C)
±2.5 K (-50 °C … 333 °C)
±0.75 % (333 °C … 1200 °C)
Sensor (EN 60584-2) Replaceable sensor, type K
Display LC display, 3.5 segments, (max. 1999)
Power supply 1x 9 V alkaline battery (NEDA 1604, IEC 6F22)
Operating temperature 0 °C ... 50 °C
Storage temperature -20 °C ... 60 °C, 10 % ... 70 % rH (non-condensating)
Dimensions 162 mm x 76 mm x 38.5 mm
Weight (without battery) 0.21 kg
Subject to technical alterations 12.10.
EU directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
6
Measured value resolution (0.1 °C/1.0 °C)
This function changes the measurement resolution is changed between 0.1 °C and 1.0 °C. The resolution
of 0.1 °C is particularly useful for measurements ÷100 °C where it is necessary to determine the tempera-
ture exactly. A resolution of 1.0 °C is recommended for measuring higher temperatures.
Manual_ThermoMaster_GB_Rev1210.indd 09 03.02.2011 14:03:42 Uhr