User manual

0.93 0.93
2 m 2 m
0.0 °C 0.0 °C
Hor Line
Ver Line
Use global para
Emiss:
Distan:
Offset:
Use global para
Emiss:
Distan:
Offset:
Setting horiz. line Setting horiz. line
Hor Line
Ver Line
Hor Line
Ver Line
Area 1
Area 2
Area 3
Area 1
Area 2
Area 3
11.3
12.0
13.0
40
GB
Horizontal line measurement / parameters
For horizontal measurement, you can either use the previously set general parameters (see chapter 8) or deÖ ne
different parameters.
To set values that deviate from the general parameters, deactivate the check for the general
parameters in this menu.
!
Activate / deactivate vertical line measurement
Activate / deactivate area measurement
Vertical line measurement works just like horizontal line measurement (see chapter 11 ff.) and is used in
the same manner.
Up to three measuring surfaces can be set at one time. They can be assigned measurement-speciÖ c
parameters as well as the following properties: maximum temperature, minimum temperature, average
temperature.
activated
de-
activated
Vertical
line
activated
de-
activated
Area
measure-
ment
Manual_ThermoCamera_Vision_Rev.0113.indd 40 25.01.13 10:07