User manual

0.93
2 m
0.0 °C
0.93
2 m
0.0 °C
A1H: 75.2
A1L: 73.8
A1A: 74.7
1
Area 1
Area 2
Area 3
Area 1
Area 2
Area 3
Max
Min
Avg
Mode Area 1
Use global para
Emiss:
Distan:
Offset:
Area Setting 1
Use global para
Emiss:
Distan:
Offset:
Area Setting 1
ThermoCamera-Vision
13.1
13.2
13.3
41
GB
Area measurement / function
activated
de-
activated
Max.
Min.
Avg
Area measurement / parameters
For each measurement point, you can either use the previously set general parameters (see chapter 8)
or deÖ ne different parameters.
To set values that deviate from the general parameters, deactivate the check for
the general parameters in this menu.
!
Measurement points / symbols
A1 H Area 1 maximum temperature (red)
A1 L Area 1 minimum temperature (green)
A1 A Area 1 average temperature
Once activated, the respective measuring areas appear on the display. The predeÖ ned measurement points
appear within the measuring area using the symbols listed below. For each measurement point within the
measuring area, the temperature is displayed in the predeÖ ned measurement unit on the top left.
Manual_ThermoCamera_Vision_Rev.0113.indd 41 25.01.13 10:07