User manual

22.9 °C
Above
1.1 °C
Green
22.9 °C
Unter
1.1 °C
Green
22.9 °C
Above
1.1 °C
Green
ISO
Settings
Clear Screen
ISO
Settings
Clear Screen
ISO
Settings
Clear Screen
Mode:
Level:
Width:
Color:
ISO Setting
Mode:
Level:
Width:
Color:
ISO Setting
Mode:
Level:
Width:
Color:
ISO Setting
Cancel CancelOK OK
Remove Measures
Iron
Rainbow
Remove Measures
Iron
Rainbow
Settings Settings
17.0
17.1
46
GB
Isothermal function
Settings
The isothermal function can display deÖ nable temperature ranges with the same colour scheme, similar
to a Ö lter. This allows the particularly relevant temperature ranges to be made visible. Using speciÖ c
parameters, the isothermal function must be set for each speciÖ c measurement task. The settings
parameters resemble a "if-then" function. If the predeÖ ned condition is met, the temperature range
is displayed as determined.
Users can quickly and safely make complex adjustments to default settings which affect all relevant device
parameters. Special default settings make it easier to adjust the settings for speciÖ c applications as they
can then be pre-conÖ gured using the PC software.
Mode Temperature "above",
"below" or "within"
Target temperature in °C
Temperature span in °C
Color Temperature range shown if
condition is met
Example Temperatures above target
temperature + show
temperature span in green
Save settings
To mask certain areas of the image, you can use the colour black in MIX mode (14.3)
to conceal the parts of the image you do not want to see.
!
Manual_ThermoCamera_Vision_Rev.0113.indd 46 25.01.13 10:09