Operation Manual

DampFinder Compact

The universal index mode is used to compare measuring points

and therefore to ascertain moisture. The moisture content of

building materials can be additionally determined in % with the

aid of the conversion table.

Be aware that walls (or surfaces)

with differing material structures,

or even variations in material

composition, can cause measure-

ment results to be falsied. Perform

multiple comparative measurements.

You read off the measurement

results from the following index

scale and convert them to %

with the aid of the table.

Example

Building material: Anhydrite screed

Measured value: 280

Result: 0.1% material moisture

Index mode (Determine building moisture)

If there is no response when measuring,it is possible

that the measured material is too dry. Perform a self-test

of the device with the protective cap to make sure the

device is in good working order.

°C / °F

DampFinder Compact

6 sec

1 sec 3 sec

°C <> °F

OFF