LaserRange-Master X2 DE 04 GB 10 NL 16 DK 22 FR 28 ES 34 IT 40 PL 46 FI 52 PT 58 SE 64 NO TR RU UA CZ EE LV Laser 650 nm LT RO BG GR
Laser 02
LaserRange-Master X2 x x · y = m2 y z x y x · y · z = m3 03
! Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference. Compact laser distance meter for measuring length, area and volume DISPLAY: i a h b c g d f e 1. 6. KEYPAD: 2. 3. 5.
LaserRange-Master X2 Switch on, measure and switch off: device on laser on 1x 2x measure device off 3x 3 sec Change unit of measure: Delete the last measured value: Press and hold button: m / _‘ _“ / inch / ft Change measurement point (reference): rear front Change measurement function: area area addition 1x 2x volume length 3x 4x Length measurement: device on laser on measure 2x 1x 3x Area measurement: device on area 1x 1. measurement 2.
Area addition: device on 1x area addition 1. measurement 2. measurement = area 1 3. measurement = area 1 + area 2 2x 1x 2x 4x 5x ... ... 3x Addition of further areas: Laser active / ... measurement = area 1 + area 2 + area 3 + ... ! Linked wall areas are added here. When adding areas, only the length needs to be measured as from the 3rd measurement. The value from the 1st measurement is always used as the height. Volume measurement: device on volume 1. 2. 3.
LaserRange-Master X2 Pythagoras functions 1, 2, 3: 1 2 3 Pythagoras function 1: device on Pythagoras 1 1. 1x 2. measurement result: height angle 1x 1x 2x Pythagoras function 2: device on Pythagoras 2 1. 2. 3. measurement 1x result: height 2x 1x 2x 3x Pythagoras function 3: device on Pythagoras 3 1. 2. 3.
Continuous measurement / min/max values: device on 1x activate start stop 2x 2 sec ! A signal sounds at 1 second interval during the measurement. The LC display shows the max value, the min value and the current value. The max value is required to determine diagonals while the min value is used to determine verticals and horizontals. Switch signal tone on/off: device on tone on tone off 2 sec 2 sec 1x Important notices – The laser points to the location that will be measured.
LaserRange-Master X2 Technical Data (Subject to technical changes without notice) Inside measurement range 0,5 m - 25 m Precision (typical) ± 3 mm / 10 m* Laser class 2 < 1mW Laser wavelength 650 nm Power supply 2 x AAA 1.5 Volt batteries Dimensions 110 x 43 x 28 mm Weight (incl. batteries) 110 g Automatic switch-off 30 sec LCD lighting / 45 sec laser / 3 min device Operating temperature 0°C – 40°C Storage temperature -20°C – 70°C Article number 080.
LaserRange-Master X2 Umarex GmbH & Co KG – Laserliner – Möhnestraße 149, 59755 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: +49 2932 638-333 laserliner@umarex.de Umarex GmbH & Co KG Donnerfeld 2 59757 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: -333 www.laserliner.com Rev.
