Operation Manual

ENGLISH8
MultiBeam-Laser MBL 5
8 Side beam calibration
port (Y-axix)
9 Magnets
10 5/8” nut for
connection to
constrution tripod
(mount from bottom).
11 Connecting screw
MultiBeam 5
12 Screw mounting holes
(accepts standard
drywall screws)
13 Slot for tightning belt
1
5
4
2
3
6
7
4
12
13
11
10
1 Laser emitting window
2 Rubber grip housing
3 Battery compartment-
cover
4 1/4” nut for connection
to camera tripod
5 ON / OFF-Switch
Pendulum lock
6 Self-leveling pendulum
(inside)
7 Front beam calibration
port (X-axis)
9
Battery replacement
Make sure the batteries
are correctly poled!
A
B
Switch on
Assemble with connecting screw (11) MultiBeam-Laser 5
and magnetic base. Switch the unit on (5). The laserdots
will be projected.
Applications (examples see P. 2)
A Aligning
B Horizontal levelling
C Plumb line
D Height projection
L
Note:
If the device is positioned too much out of level (more
than 4° or 6°), the laser will blink. Position the device on
a more level surface.
8
Magnetic base