Operation Manual

MultiMeter-Home

X10Ω

X1kΩ

0 Ω - 1 kΩ

x 10

x 1000

ResultScale

Measuring

range

Resistance measurement

To measure resistance, set the rotary switch to the “Ω” position

with the corresponding measuring range (X10Ω - X1kΩ).

Before each measurement, check that the pointer is set exactly

to „0“ on the OHM-scale (A). Hold the two test prods so that they

touch and, if necessary, adjust the pointer with rotary knob (3).

Then connect the measuring contacts

to the object to be tested.

Reading the scale (A):

green

orange

red

Good: battery

fully charged

Weak: battery is weak

and will soon need

replacing

Replace: battery

is flat and should

be replaced

Battery charge statusColour

BAT. Battery charge status measurement

To measure the battery charge status, set the rotary switch to

the “BAT. “ position with the corresponding measuring range.

1.5 V round cells / AA, AAA, C, D

9.0 V flat cells / E-block

Then connect the measuring contacts

to the battery.

3-colour display scale (D):

redblack