Operation Manual

18
4
1. 3.
2.
EN
Horizontal and vertical levelling
Switch the laser device on. The automatic sensor is now active and will level
the laser device automatically. Horizontal or vertical object levelling can be
carried out as soon as device-levelling is completed. Maximum accuracy is
attained when device-levelling is completed.
Lasers can be switched on and off individually with the H or V buttons (press
buttons briefly).
The laser lines flash when the device is outside the automatic levelling
range of 2°. Position the device such that it is within the levelling
range.
!
Alignment with
free-moving base
Alignment with
vernier adjustment