Operation Manual

SensoLite 110 / SensoLite 110 G
07
GB
The laser receiver has two tolerance settings:
– Free-hand range (10): Display with larger tolerance for rough
alignment by hand.
– Precision range (11): Display with smaller tolerance for precision
alignment (e.g. levelling staff).
!
Working with the laser receiver
Set the rotary laser to maximum speed and switch the laser receiver on.
It is able to detect the laser beam at a great distance now. Move the
SensoLite up and down through the laser beam until the middle indicator (13)
appears. Mark the measured height at the perimeter marking groove.
Inserting the battery
Open the battery compartment and
insert batteries according to the symbols.
Be sure to pay attention to polarity.
–
+
Continuous tone
= mark the reference
Rapid peeping Slow peeping
37 mm
Laser