Operation Manual

ThermoXplorer Pro
45
1 sec
26.0
26.1
IR_1/(2/3)
GB
Image recordings of any measurement situation can be created for subsequent
documentation in the menu or with the „Trigger“ button.
If the „Trigger“ button is set to „IR/Digital“, you can use it to switch between the IR and
the corresponding digital image in playback mode. The display will remain blank if no IR
or digital image is available and „No IR Image“ or „No Digital Image“ will be shown.
In the media gallery, you can access all image data recorded with the thermal camera.
You can access the media gallery either via the menu or via hot key. To close the media
gallery, press the „ESC“ hot key.
Media gallery / playback mode
Image recording
The „Trigger“ button must be
set to „Save“ in order to record
images. Refer to Section 6.4.
!
Save Cancel
Measurement
Level/Span
Setup
File
Open
Save
Save settings
Auto Save
Delete
Format
Measurement
Level/Span
Setup
File
Open
Save
Save settings
Auto Save
Delete
Format