Operation Manual

48
27
28
29
GB
The target laser makes area-specic measurements easier by facilitating pinpointing.
The target laser can be assigned to the „Trigger“ button in the menu.
Target laser
With the software provided on the CD it is possible to transfer the recorded data to a PC
and to use the data for further processing and documentation. Load the CD in the drive
and follow the installation routine. After successful installation, start the application.
Connect one end of the supplied USB cable to the mini-USB port of the device and the
other end to a free USB port on your computer. For further information on how to use the
software, refer to the Help function that contains a detailed description of the functions.
USB connection
It is not necessary to install a driver. The software operates under
Windows XP / 7 and 8.
!
– Perform the task at a location that is clean and free of dust and water
– Switch off the camera, remove the battery
– Earth to protect from static charges
– Do not touch the lens
– Warranty expires in the case of improper handling
Instructions for maintenance