Operation Manual

VideoControl-Master
25
GB
Technical data
Subject to technical alterations. 11.12.
Screen type 5.0“ TFT colour display
Connections
Industrial connector for camera
TV-Out port, PAL or NTSC
USB adapter, Type Mini-B
SD card slot
DC adapter for 5V DC power pack
Wireless receiver
Typical range 10 m, max. 30 m
ISM 2.4 GHz video transmission
Audio/Video (Stereo/PAL or NTSC)
receive 87 dB, SNR 42 dB, Fmod 15 kHz
Display resolution 640 x 480
pixels
Image format / Image resolution JPEG format / 640 x 480 pixels
Video format / Image refresh rate ASF / 30 frames / sec
LED 10 brightness levels
Zoom 2x digital zoom in 10% increments
External memory 2 GB SD card (supports up to max. 16 GB)
Port USB 2.0
Auto shutdown 5 min / 10 min / 15 min / 30 min (adjustable)
Power supply Li-Ion rechargeable battery / power pack
Operating time 4 hours
Operating temperature -10 … 60°C
Storage temperature -20 … 70°C
Protection class IP65
Humidity max. 90 % relative humidity (no condensation)
Weight (incl. Li-Ion rechargeable battery) 0,86 kg
Dimensions (W x H x D) 200 mm x 130 mm x 60 mm
Guarantee, product care and disposal
This device complies with all necessary standards for the free movement
of goods within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
Connect power supply/battery charger
To charge the unit, plug the supplied power supply/battery charger into charging socket „i“ and connect it to a
corresponding power source.
Connecting to a monitor
The VideoControl-Master can be connected to a monitor with the supplied cable. Use connection „g“ for this
purpose and select the corresponding video output in the menu, see „8.7 Video Output“.
Reset
Pressing the Reset button „h“ will restart the unit.
Manual_VideoControl-Master_Rev.1112_DE_PL.indd 25 15.01.13 07:27