Operation Manual

VideoFlex G3
Instructions for use
19
GB
It is absolutely vital to ensure that the VideoFlex G3 does not come into contact with chemicals,
current, moving or hot objects. This can damage the device and put its user at risk of serious injury.
• The LCD unit must not be immersed in water.
• The camera head is not acid-resistant or reproof.
The VideoFlex G3 must not be used for medical examinations / examining people.
• Strong vibrations and extreme deviations in temperature should be avoided.
The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
EU directives and disposal
This device complies with all necessary standards for
the free movement of goods within the EU.
This product is an electric device and must be collected separately
for disposal according to the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
Technical Data
Technical revisions reserved. 10.15.
VideoFlex G3 10 m
Camera head / Cable ø 9 mm, IP 68 (immersion depth 2 m, 60 min.)
Camera focus F1 cm - F6 cm for 9 mm standard camera
Length of flex cable 10 m
Weight incl. battery pack and flex cable 1,6 kg
VideoFlex G3 1,5 m
Camera head / Cable ø 6 mm / 9 mm, IP 68 (immersion depth 1,5 m, 60 min.)
Camera focus F1 cm - F6 cm for 6 mm / 9 mm standard camera
Length of flex cable 1,5 m
Weight incl. battery pack and flex cable 0,5 kg / 0,56 kg
Screen type 3,5” TFT colour display
Camera resolution 640 x 480 pixels
Display resolution 320 x 240 pixels
Image/Video resolution 720 x 480 pixels
Image format/Video format JPEG / AVI
LED 10 brightness levels
Zoom 1.5x digital zoom in 10% increments
Memory Supports up to max. 8 GB SDHC card
Port Mini USB
Connections Micro-SD, Analog-video
Power supply Li-Ion pack battery 3.7V / 1.7Ah / 5V / 1A power supply unit
Charging time approx. 4 h
Operating time approx. 4 h
Operating temperature 0 °C … 45 °C
Storage temperature -10°C … 60°C