Operation Manual

ENGLISH
15
ENGLISH
ZipLevel
Calibration in 3 steps:
Step 1: Lay the measuring module on its base or back next to the basic
unit and press the CAL-key again. (0) is blinking on the display.
Step 2: Press
CAL again. (121.9) is blinking on the display.
Step 3: Lift to a height of 1.219 m and press
CAL again. Hold steadily
during the process. Then (121.9) is shown on the display.
1,219 m
Step 1 Step 2 Step 3