Operation Manual

18
ENGLISH
ZipLevel
TIPS FOR USERS
1) Check the point of reference often when carrying out critical/serious
levelling jobs or press ZERO often at the point of reference. (CAL is not
necessary for levelling!) Hold the height differences between line, basic
unit and measuring module as low as possible.
2) If possible, avoid high differences in temperature between line and
measuring module (e.g. sun and shade).
3) Avoid unnecessary kinks over objects.
4) Avoid pulling hard, whipping or stepping on the line without checking
the point of reference or setting to zero.
5) The display blinks ‘
8888‘ at use beyond the specified altitude range.
Beyond the temperature range under -30 °C or over +70 °C ‘CAL’ is
continuously shown.
6) As the ZipLevel shows the last carried out function when switched on,
please make sure that you leave the function after every measuring.
Hold the relevant key for 2 seconds and you leave the function.
7) Wischen Sie bei matschigen Bedingungen die Messleitung vor dem
Aufwickeln mit einem Tuch ab.
8) Does
--0-- respectively „CAL“ show up, press the ZERO-key as soon as
possible respectively calibrate the appliance.
ENGLISH