SDS

Latex Agent Dirt Repel
May 21, 2015
Page 3 of 5
Precautions for safe handling: Avoid contact with eyes, skin and clothing. Avoid breathing vapors. Use with
adequate ventilation. Wash exposed skin thoroughly with soap and water after use.
Conditions for safe storage, including any incompatibilities: Store in a cool, dry, well ventilated area away
from oxidizing agents and other incompatible materials. Protect from physical damage.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure guidelines:
Glycerin (mist)
15 mg/m
3
TWA (Total dust) OSHA PEL
5 mg/m
3
TWA (Respirable fraction) OSHA PEL
Light Stabilizer
None Established
d-Limonene
30 ppm AIHA WEEL
Appropriate engineering controls: Use with adequate general or local exhaust ventilation to keep exposures
below occupational exposure limits and to minimize exposure levels.
Individual protection measures:
Respiratory protection: None needed under normal use conditions. If exposures are excessive, a NIOSH
approved particulate Selection of respiratory protection depends on the contaminant type, form and
concentration. Select in accordance with OSHA 1910.134 and good Industrial Hygiene practice.
Skin protection: Wear impervious gloves if contact is possible.
Eye protection: Chemical safety goggles recommended if splashing is possible.
Other: Suitable washing facilities should be available in the work area.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance (physical state, color, etc.): White oil in a water emulsion
Odor: No odor
Odor threshold: Not available
pH: Not available
Melting point/freezing point: 32°F / 0°C
Boiling Point: 212°F / 100°C
Flash point: >93.3°C / >200°F
Evaporation rate: Not available
Flammability (solid, gas): Not applicable
VOC: 10.2 g/L
Flammable limits: LEL: Not applicable
UEL: Not applicable
Vapor pressure: Not available
Vapor density: Not available
Relative density: 0.987
Solubility(ies): Miscible
Partition coefficient: n-octanol/water: Not
available
Auto-ignition temperature: Not available
Decomposition temperature: Not available
Viscosity: Not determined
10. STABILITY AND REACTIVITY
Reactivity: Not reactive under normal conditions of use.
Chemical stability: Stable.