MSDS

Page 1 of 2 Latexite Optimum
MATERIAL SAFETY DATA SHEET – OSHA 174
May be used to comply with OSHA’s Hazard
communication Standard, 29 CFR 1910.1200.
Standard must be consulted for specific requirements.
US Dept of Labor
Occupational Safety and
Health Administration
(Non-Mandatory Form)
From approved OMB No.
1218-0072
Product Name: Latex•ite
®
Optimum Asphalt Sealer
Product Class: Asphalt Driveway Sealer
Manufacturer: Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410
Emergency Phone number: [phone], Customer Service 800-851-5606
Effective Date: 05/12/13 Date Superseded: 08/25/12
Website: www.latexite.com
Description: Consumer packaged (ready-to-use) Latex•ite
®
Commercial Grade Asphalt Sealer for asphalt is a water
based colloidal emulsion comprised of water, sand, clay, acrylic polymers and asphalt. Proper application of ready-to-use
emulsified product as applied product presents no degree of hazard to the user. Outdoor use only.
Ingredient CAS# %
Petroleum Asphalt 8052-42-4 20-35
Mineral Filler 1332-58-7 10-20
Crystalline Silica 14808-60-7 10-20
Water 7732-18-5 30-45
Polymer Blend 25586-20-3 2-5
Application of ready-to-use Commercial Grade Asphalt Sealer is well below OSHA exposure limits.
Boiling Point (degrees F/C): >212° F/0° c Specific Gravity: 1.3-1.5 pH: 6.50 - 8.0
Vapor Pressure (mm Hg.): Nearly equal to water. Melting point: N/A Physical State: Liquid
Vapor Density (air = 1): Heavier than air Evaporation Rate (water = 1): 1 Weight/gallon: 9.2lbs.
Solubility in Water: Easily dispersible in water. Max VOC: Less than 10 g/l
Appearance and Odor: Dark brown to black, thick consistency liquid. % Volatile by vol: 0%
Flash Point: 470° minimum Flammability Classification: N/A LEL: N/A UEL: N/A
Extinguishing Media: CO2, dry chemical, foam, sand.
Special Fire Fighting Procedures: Full protective equipment, including self-contained breathing equipment apparatus to
be worn. Water cool sealed containers in area of fire to prevent rupture due to steam generation.
Unusual Fire and Explosion Hazards: Keep away from sources of ignition.
Stability: Unstable: Stable: X Conditions to avoid: Keep from freezing and extreme heat.
Incompatibility (materials to avoid): Strong oxidizers.
Hazardous Decomposition or Byproducts: Combustion may yield fumes, smoke, carbon monoxide and carbon dioxide.
Section I – Product Identification
Section II – Ingredient Composition
Section III – Physical / Chemical Characteristics
Section IV – Fire and Explosion Hazard Data
Section V – Reactivity Data
Section I –Product Information
1
1
0
C
Optimum