MSDS

Page 2 of 4 2X CRACK FILLER
APPEARANCE & ODOR: Asphaltic Odor
BOILING POINT: N/A
VAPOR PRESSURE: N/A
SPECIFIC GRAVITY: N/A
SOLUBILITY IN WATER: Dispersed in water, insoluble when dry.
EVAPORATION RATE: Not Known
PH: 6-8
PHYSICAL STATE: Liquid
FREEZING POINT: 32° F
%VOLATILE (by Wt.): N/A
VAPOR DENSITY: 1
THRESHOLD ODOR: N/A
WATER/OIL DIST. COEFFIECIENT: N/A
MAX VOC: Less than 10 g/L
Flammability Classification: N/R
Flash Point (method used): Greater than 210° F. TCC
Flammable Limits: LEL: N/A UEL: N/A
Combustion Products: Hydrocarbon compounds, CO, and CO
2
.
Extinguishing Media: Water, Foam, dry chemical, CO
2
.
UN/NA/PIN#: N/A
NFPA Rating: Health 1; Fire 1; Reactivity 0
Impact Sensitive: No
Static Sensitive: No
Explosive Power: N/A
Burning Rate: N/A
THRESHOLD LIMIT VALUE: See Section II
ROUTES OF ENTRY: Skin, eyes, inhalation, ingestion.
EFFECTS OF OVEREXPOSURE / ACUTE OVEREXPOSURE:
Eyes: May cause severe eye irritation which can result in irreversible damage.
Inhalation: May cause headaches, dizziness, nausea vomiting and perhaps loss of consciousness.
Vapors may be irritating to eyes, nose and throat.
Skin: May cause irritation of skin and/or systemic effects by absorption.
Ingestion: May result in vomiting; aspiration of vomitus must be avoided as liquid contact with the
lungs can result in chemical pneumonitis and pulmonary edema/hemorrhage. Have patient drink large
amounts of water; contact a physician.
EMERGENCY AND FIRST AID PROCEDURES:
Eyes: Immediately flush with clean water for 15 minutes while holding eyelids open; consult a
physician.
Section III – PHYSICAL DATA
Section IV – FIRE AND EXPLOSION HAZARD DATA
Section V – HEALTH HAZARD DATA